Self-falling and Loading Fuses Vina Electric
504 Power specializes in distributing Self-falling and Loading Fuses Vina Electric with IEC, TCVN, ANSI quality standards.
Please contact hotline: 094 608 0504 for technical advice and quotation.
| SPECIFICATIONS | |
|---|---|
| Code LPFCO - 13 | |
| Rated voltage (kV) | 12 |
| Rated Current (A) | 100/200 |
| Rated breaking current (kA) | 8/10 |
| Rated lightning impulse withstand current (kV) | 110 |
| Power frequency withstand voltage (kV) | 36 |
| Probe line length (mm) | 360 |
| Code LPFCO - 23 | |
| Rated voltage (kV) | 24 |
| Rated Current (A) | 100/200 |
| Rated breaking current (kA) | 8/10 |
| Rated lightning impulse withstand current (kV) | 125 |
| Power frequency withstand voltage (kV) | 42 |
| Probe line length (mm) | 720 |
| Code FCS - 33 | |
| Rated voltage (kV) | 33 |
| Rated Current (A) | 100/200 |
| Rated breaking current (kA) | 8/12 |
| Rated lightning impulse withstand current (kV) | 170 |
| Power frequency withstand voltage (kV) | 50 |
| Probe line length (mm) | 990 |
| Code FCS - 43 | |
| Rated voltage (kV) | 40.5 |
| Rated Current (A) | 100/200 |
| Rated breaking current (kA) | 8/10 |
| Rated lightning impulse withstand current (kV) | 210 |
| Power frequency withstand voltage (kV) | 70 |
| Probe line length (mm) | 1215 |
Self-falling and Loading Fuses Vina Electric is designed to be suitable for medium voltage grid systems from 12kV to 40.5kV.
– To protect transmission lines and distribution substations against overload and short circuit, as well as disconnect equipment.
– The outdoor FCO series is developed based on the most common conditions and applications, the fuse is designed with an arc disperser when cutting the substation under load.
– Typical equipment models have been tested at the laboratories of Quatest 1, Quatest 2, Quatest 3 quality measurement centers and General Departments.
– All metal parts are specially treated to prevent erosion and rust. All technical standards are compliant with TCVN, IEC282-2 and ANSI/IEEE37.41.
The FCO-VN type self-falling fuse is composed of the following main components:
– Silicone insulator with large probe current length.
– The upper and lower contact assemblies are made of electrotechnical copper.
– Reasonable lead wire structure, easy to remove and replace.
– Light weight, easy to transport and construction.
– Highly durable, suitable for tropical environments, industrial dust, coastal areas, salt mist…
