Drop-out Fuse Cutout Switch
504 Power specializes in distributing Drop-out Fuse Cutout Switch according to ANSI C37.41, C37.42, IEC 282-2 standards at competitive prices nationwide.
Please contact hotline: 094 6080504 for technical advice and quotation.
| SPECIFICATIONS | |
|---|---|
| Standard | ANSI C37.41, C37.42, IEC 282-2 |
| Rated voltage | 24-35kV |
| Current ratings | 100 & 200A |
| Rated frequency | 50Hz |
| Short circuit breaking capacity | 12 kA |
| Impulse withstand voltage (BIL) | 125-150-170kV |
| Leakage current length | 340-440-720mm |
| Insulating materials | Ceramic |
Drop-out Fuse Cutout Switch is a protective device for medium voltage networks:
– Combined with a fuse and circuit breaker, used in overhead and branch lines to protect distribution substations from overload.
– Using the simple hanger mechanism. If the fuse is burned, the fuse holder releases quickly and reliably.
– The special coupling construction thanks to the design of the fuse holder and the switch pole at any angle in order to secure contact of the static as well as dynamic contacts.
– The other iron components of the Drop-out Fuse Cutout Switch are also galvanized, which has a long service life, performing well in both salt and humid climates..
– The wire connector is a special shaped clamp, the wire direction can be connected in both vertical direction and horizontal direction.
